YC13XX是一款专为2400MHz ~ 2483.5Mhz ISM频段运行而设计的低功耗、高性能、集成蓝牙5.2BR+BLE+2.4G私有协议三模产品，内置32位MCU，96K位RAM和512位eFuse。
YC13XX支持蓝牙5.2的2Mbps，远距离和定位功能，并能通过HCI接口和其他MCU连接以实现更复杂的无线应用。
YC13XX支持多重协议设射频，+12dBm输出功率，-99dBm接受灵敏度，工作温度范围达-40度到+110度，特别适合灯控应用。
YC13XX内置USB，32位MCU，24MHz时钟，无需外接电容的LDO，支持1.7~5.5V的工作电压，特别适合成本敏感的MCU应用，如鼠标，玩具和即弃用形无线产品。
YC13XX有QFN4x4_32L , SOP16L, SOP8L & KGD等不同封装供您选择。
nMCU subsystems
24 MHz 32-bit proprietary MCU for system control and PHY/link layer management
AES128 HW encryption
Serial wire debug
nMemories
512 bit eFuse
12 kB date RAM
4 kB RAM supporting retention mode
nRadio transceiver
BR/Bluetooth 5.2/Long Range
+12 dBm TX power in 1dB/steps
-99 dBm RX sensitivity @ BLE 1 Mbps
-96 dBm RX sensitivity @ BLE 2 Mbps
Integrated balun with single-ended output and direct connection to antenna
5.8 mA RX system current @ BLE 1 Mbps -99 dBm sensitivity (3V DC-DC 90% efficiency)
5.2 mA RX system current @ BLE 1 Mbps -97 dBm sensitivity (3V DC-DC 90% efficiency)
10.9 mA TX system current (3V DC-DC 90% efficiency, 0 dBm)
关键特性
nPower management
Always-On (AON) supply: 1.7~ 5.5V
Main supply: 1.3 ~ 5.5V supporting external DCDC through a dedicated wakeup pin
Integrated LDOs requiring no external decoupling capacitors
3.3V 40 mA capless LDO
1.3 μA in sleep mode (wake on RTC, no RAM retention)
2 μA in sleep mode (wake on RTC, 4 KB RAM
retention)
nClock generation
Dedicated PLL to support 16M/24M/26M/32M crystals
Crystal trimming
40 MHz RC oscillator for fast wakeup
Low jitter low power 32 KHz RC oscillator
n10-channel 10-bit ADC
nDigital peripherals
Up to 20 GPIOs w/ functions fully multiplexed
Two-wire master (I2C compatible) up to 600 kbps
2 x UART(RTS/CTS) with HCI-H5 protocol up to 3.25 Mbps
2 x SPI Master/Slave up to 24 Mbps
1-axis Quadrature Decoder
12 Mbps Full Speed USB 2.0
nTemperature range: -40°C to +110°C
